Southwest Washington, DC — crawl-space work-order review. The available work order lists a heavy clean-out, insulation removal, vent and penetration sealing, fungal-treatment materials, vapor-barrier work, dehumidification and electrical work. It is a scope document, not by itself proof of the original complaint or the finished result.
At a glance: The scope covers about 720 square feet of crawl space, removal of existing fiberglass insulation, sealing four foundation vents, wrapping the ground, perimeter walls and four piers, and installing a dehumidifier with condensate removal. We have not matched the images previously shown on this page to this property, so they are not presented as evidence of this job.
Why would a plan remove crawl-space insulation?
The work order calls for taking out existing fiberglass before the new enclosure work. That can make sense when insulation is damaged, displaced or obstructs access to framing, but the work order alone does not establish its condition at this house. Whether insulation should be replaced, relocated or omitted requires a site-specific thermal and moisture assessment.
Why seal the four vents?
Vents can admit humid outdoor air in warm weather. Sealing them is one component of an encapsulation strategy, provided the whole moisture-control and conditioning plan is appropriate for the building. The work order lists four vents plus smaller penetrations; it does not document a before-and-after humidity test or prove that the vents were the sole cause of any problem.
What did the barrier scope cover?
The document specifies a 20-mil ground liner over approximately 720 square feet, wall coverage along roughly 115 linear feet, and separate treatment around four piers. These details matter because a floor sheet alone does not make a complete enclosure. The final seam, termination and penetration details would need finished-site photographs to verify.
What about fungal treatment and electrical work?
The work order includes surface-treatment and cleaning labor. It also notes that treatment may not remove all visible staining or discoloration from wood. We cannot infer mold clearance or restored wood appearance from the order. A dehumidifier, condensate pump, monitoring equipment and electrical circuit are also listed; the available record does not confirm commissioning, discharge routing or follow-up readings.
What remains unverified: The customer’s initial complaint, completed scope, same-property installation photographs, and post-work performance. We will not present a dry-crawl-space outcome or a project price as fact without the appropriate records. For guidance on when encapsulation, drainage or insulation is appropriate, see our crawl-space repair guide.